Honda Grom Kitaco Clutch Cover Install Fail – Welp, it all went HORRIBLY wrong!

GROM
Honda Grom Kitaco Clutch Cover Install Fail – Welp, it all went HORRIBLY wrong!

Yup, I’m an idiot. After watching a few YouTube tutorials and doing a bit of research I thought I’d finally get around to doing the Kitaco Clutch Cover upgrade on my 2017 Honda Grom, as well as putting in a new oil pump and some stiffer clutch springs while I had the case open.

Unfortunately I made a bit of a catastrophic error and had to abort mission on the oil pump + springs halfway through! Anyway, still actually enjoyed doing it and learnt a bit.

Links below for some good tutorials (the parts I didn’t follow are the ones that went wrong FYI, unsurprisingly!) :

TUTORIAL LINKS :
Hard Racing clutch cover (+ spring + oil pump) tutorial :

Good Partzilla tutorial (more about clutch not this specific upgrade but I found it a good watch with relevant info) :

TOOL/PRODUCT LINKS :
I don’t have a lot of specific links handy but these sort of things :
Either get one of these :
Multipurpose Clutch basket holder ()

Or look for something like this, you can probably find much cheaper ones around :

Gear holder (grom gear holder 2.5mm – HONDA 07724-001A100 GEAR HOLDER 2.5MM)
Honda tool ()

Kitaco Clutch Cover Kit :
I got mine from here :

(Aside from standard tools, you’ll also need gaskets and crush washers for oil drain as well as oil to refill).

Finally, shoutout to hondagrom.net forum for being helpful.

Mostly shot on GoPro Hero8 and some testing out of Sonny A7iii and Tamron 28-75mm 2/8 lens

Beats Produced by ThatKidGoran

コメント

タイトルとURLをコピーしました